3.346 Inch | 85 Millimeter x 3.937 Inch | 100 Millimeter x 2.48 Inch | 63 Millimeter IKO LRT8510063 Needle Non Thrust Roller Bearings
With over 10170 full-service stores, our 3.346 Inch | 85 Millimeter x 3.937 Inch | 100 Millimeter x 2.48 Inch | 63 Millimeter IKO LRT8510063 Needle Non Thrust Roller Bearings inventory is extensive and our parts are priced right. within 24 hours. This helps Rubberized Flinger Type you maximize your productivity by saving time and your hard-earned 3.346 Inch | 85 Millimeter x 3.937 Inch | 100 Millimeter x 2.48 Inch | 63 Millimeter dollars.
What is LRT8510063 bearing cross reference？
| Brand Name: |
IKO |
| Model Number: |
LRT8510063 |
| Series: |
LM48500 |
| Cone Part Number: |
LM48549X |
| Cup Part Number: |
LM48514 |
| Design Units: |
Imperial |
| Bearing Weight: |
0.30 Kg |
| Cage Type: |
Stamped Steel |
| d: |
34.925 mm |
| D: |
68.263 mm |
| PDF |
LRT8510063 |
Product Details
| Series |
LM48500 |
| Cone Part Number |
LM48549X |
| Cup Part Number |
LM48514 |
| Design Units |
Imperial |
| Bearing Weight |
0.30 Kg |
| Cage Type |
Stamped Steel |
| d |
34.925 mm |
| D |
68.263 mm |
| B - Cone Width |
18.288 mm |
| C - Cup Width |
13.970 mm |
| B |
18.037 mm |
| R - Cone Backface To Clear Radius1 |
2.290 mm |
| r - Cup Backface To Clear Radius2 |
1.27 mm |
| da - Cone Frontface Backing Diameter |
39.88 mm |
| db - Cone Backface Backing Diameter |
43.43 mm |
| Da - Cup Frontface Backing Diameter |
63.00 mm |
| Db - Cup Backface Backing Diameter |
58.93 mm |
| Ab - Cage-Cone Frontface Clearance |
2 mm |
| Aa - Cage-Cone Backface Clearance |
0.3 mm |
| a - Effective Center Location3 |
-3.6 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 |
3760 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 |
14500 lbf |
| C0 - Static Radial Rating |
14200 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 |
2430 lbf |
| K - Factor7 |
1.55 |
| e - ISO Factor8 |
0.38 |
| Y - ISO Factor9 |
1.59 |
| G1 - Heat Generation Factor (Roller-Raceway) |
18 |
| G2 - Heat Generation Factor (Rib-Roller End) |
10.6 |
| Cg - Geometry Factor |
0.0666 |