0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.551 Inch | 14 Millimeter IKO LRTZ101414 Needle Non Thrust Roller Bearings
With over 10170 full-service stores, our 0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.551 Inch | 14 Millimeter IKO LRTZ101414 Needle Non Thrust Roller Bearings inventory is extensive and our parts are priced right. within 24 hours. This helps 2.9 mm Cy (max) you maximize your productivity by saving time 0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.551 Inch | 14 Millimeter and your hard-earned dollars.
What is LRTZ101414 bearing interchange？
| Brand Name: |
IKO |
| Model Number: |
LRTZ101414 |
| Series: |
28000 |
| Cone Part Number: |
28156 |
| Cup Part Number: |
28300 |
| Design Units: |
Imperial |
| Bearing Weight: |
0.4 Kg |
| Cage Type: |
Stamped Steel |
| d: |
39.980 mm |
| D: |
76.2 mm |
| PDF |
LRTZ101414 |
Product Details
| Series |
28000 |
| Cone Part Number |
28156 |
| Cup Part Number |
28300 |
| Design Units |
Imperial |
| Bearing Weight |
0.4 Kg |
| Cage Type |
Stamped Steel |
| d |
39.980 mm |
| D |
76.2 mm |
| B - Cone Width |
19.649 mm |
| C - Cup Width |
15.507 mm |
| B |
19.347 mm |
| R - Cone Backface To Clear Radius1 |
2.290 mm |
| r - Cup Backface To Clear Radius2 |
1.27 mm |
| da - Cone Frontface Backing Diameter |
44.96 mm |
| db - Cone Backface Backing Diameter |
49.02 mm |
| Da - Cup Frontface Backing Diameter |
71.88 mm |
| Db - Cup Backface Backing Diameter |
68.07 mm |
| Ab - Cage-Cone Frontface Clearance |
1.8 mm |
| Aa - Cage-Cone Backface Clearance |
0.3 mm |
| a - Effective Center Location3 |
-3.6 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 |
4390 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 |
16900 lbf |
| C0 - Static Radial Rating |
15500 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 |
3020 lbf |
| K - Factor7 |
1.45 |
| e - ISO Factor8 |
0.4 |
| Y - ISO Factor9 |
1.49 |
| G1 - Heat Generation Factor (Roller-Raceway) |
20.7 |
| G2 - Heat Generation Factor (Rib-Roller End) |
12.5 |
| Cg - Geometry Factor |
0.0709 |