MCGILL CFE 3/4 Cam Follower and Track Roller - Stud Type Interchange Guide | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | Size | Noun | Weight | UNSPSC | series: | Profile | Enclosure | Inventory |
CFE 3/4 SB CR | MCGILL | - | Bearing | 0.036 | 31171530 | - | Stud Type | Sealed | 0.0 |
BCCFE 3/4 SB | MCGILL | - | Bearing | 0.034 | 31171530 | - | Stud Type | Sealed | 0.0 |
CCFE 3/4 SB | MCGILL | - | Bearing | 0.038 | 31171530 | - | Stud Type | Sealed | 0.0 |
CFE 3/4 | MCGILL | - | Bearing | 0.036 | 31171530 | - | Stud Type | Open | 0.0 |
CFE 3/4 B | MCGILL | - | Bearing | 0.039 | 31171530 | - | Stud Type | Open | 0.0 |
CFE 3/4 S | MCGILL | - | Bearing | 0.037 | 31171530 | - | Stud Type | Sealed | 0.0 |
CFE 3/4 SB | MCGILL | - | Bearing | 0.038 | 31171530 | - | Stud Type | Sealed | 0.0 |
BCFE 3/4 SB | MCGILL | - | Bearing | 0.027 | 31171530 | - | Stud Type | Sealed | 0.0 |
CFE 3/4SB | BEARINGS LIMITED | - | - | 0.1 | - | - | - | - | 0.0 |
CFE 3/4 SB BHT | McGill | - | - | - | - | Inch CAMROL (CF) | - | - | - |
CFE 3/4'' SB | MCGILL | 19.05*9.525*12.7 | - | 0.2 | - | - | - | - | - |
IKO CF10-1V Cam Follower and Track Roller - Stud Type | Series:28000; Cone Part Number:28138; Cup Part Number:28317; Design Units:Imperial; Bearing Weight:0.5 Kg; Cage Type:Stamped Steel; d:34.976 mm; D:80.035 mm; B - Cone Width:20.940 mm; C - Cup Width:15.875 mm; B:21.435 mm; R - Cone Backface To Clear Radius1:1.520 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.89 mm; db - Cone Backface Backing Diameter:43.43 mm; Da - Cup Frontface Backing Diameter:73.90 mm; Db - Cup Backface Backing Diameter:69.09 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
30 mm x 80 mm x 100 mm SKF KR 80 PPA Cam Follower and Track Roller - Stud Type | Series:28000; Cone Part Number:28138; Cup Part Number:28317; Design Units:Imperial; Bearing Weight:0.5 Kg; Cage Type:Stamped Steel; d:34.976 mm; D:80.035 mm; B - Cone Width:20.940 mm; C - Cup Width:15.875 mm; B:21.435 mm; R - Cone Backface To Clear Radius1:1.520 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.89 mm; db - Cone Backface Backing Diameter:43.43 mm; Da - Cup Frontface Backing Diameter:73.90 mm; Db - Cup Backface Backing Diameter:69.09 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
IKO CF10-1UU Cam Follower and Track Roller - Stud Type | Series:28000; Cone Part Number:28138; Cup Part Number:28317; Design Units:Imperial; Bearing Weight:0.5 Kg; Cage Type:Stamped Steel; d:34.976 mm; D:80.035 mm; B - Cone Width:20.940 mm; C - Cup Width:15.875 mm; B:21.435 mm; R - Cone Backface To Clear Radius1:1.520 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.89 mm; db - Cone Backface Backing Diameter:43.43 mm; Da - Cup Frontface Backing Diameter:73.90 mm; Db - Cup Backface Backing Diameter:69.09 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
IKO CF10-1R Cam Follower and Track Roller - Stud Type | Series:28000; Cone Part Number:28138; Cup Part Number:28317; Design Units:Imperial; Bearing Weight:0.5 Kg; Cage Type:Stamped Steel; d:34.976 mm; D:80.035 mm; B - Cone Width:20.940 mm; C - Cup Width:15.875 mm; B:21.435 mm; R - Cone Backface To Clear Radius1:1.520 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.89 mm; db - Cone Backface Backing Diameter:43.43 mm; Da - Cup Frontface Backing Diameter:73.90 mm; Db - Cup Backface Backing Diameter:69.09 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
IKO CF10-1VBUUR Cam Follower and Track Roller - Stud Type | Series:28000; Cone Part Number:28138; Cup Part Number:28317; Design Units:Imperial; Bearing Weight:0.5 Kg; Cage Type:Stamped Steel; d:34.976 mm; D:80.035 mm; B - Cone Width:20.940 mm; C - Cup Width:15.875 mm; B:21.435 mm; R - Cone Backface To Clear Radius1:1.520 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.89 mm; db - Cone Backface Backing Diameter:43.43 mm; Da - Cup Frontface Backing Diameter:73.90 mm; Db - Cup Backface Backing Diameter:69.09 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
16 mm x 35 mm x 52 mm SKF NUKR 35 A Cam Follower and Track Roller - Stud Type | Series:28000; Cone Part Number:28138; Cup Part Number:28317; Design Units:Imperial; Bearing Weight:0.5 Kg; Cage Type:Stamped Steel; d:34.976 mm; D:80.035 mm; B - Cone Width:20.940 mm; C - Cup Width:15.875 mm; B:21.435 mm; R - Cone Backface To Clear Radius1:1.520 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.89 mm; db - Cone Backface Backing Diameter:43.43 mm; Da - Cup Frontface Backing Diameter:73.90 mm; Db - Cup Backface Backing Diameter:69.09 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
IKO CF10-1VBUURM Cam Follower and Track Roller - Stud Type | Series:28000; Cone Part Number:28138; Cup Part Number:28317; Design Units:Imperial; Bearing Weight:0.5 Kg; Cage Type:Stamped Steel; d:34.976 mm; D:80.035 mm; B - Cone Width:20.940 mm; C - Cup Width:15.875 mm; B:21.435 mm; R - Cone Backface To Clear Radius1:1.520 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.89 mm; db - Cone Backface Backing Diameter:43.43 mm; Da - Cup Frontface Backing Diameter:73.90 mm; Db - Cup Backface Backing Diameter:69.09 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
IKO CF10-1UUR Cam Follower and Track Roller - Stud Type | Series:28000; Cone Part Number:28138; Cup Part Number:28317; Design Units:Imperial; Bearing Weight:0.5 Kg; Cage Type:Stamped Steel; d:34.976 mm; D:80.035 mm; B - Cone Width:20.940 mm; C - Cup Width:15.875 mm; B:21.435 mm; R - Cone Backface To Clear Radius1:1.520 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.89 mm; db - Cone Backface Backing Diameter:43.43 mm; Da - Cup Frontface Backing Diameter:73.90 mm; Db - Cup Backface Backing Diameter:69.09 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
12 mm x 30 mm x 40 mm SKF KR 30 PPXA Cam Follower and Track Roller - Stud Type | Series:28000; Cone Part Number:28138; Cup Part Number:28317; Design Units:Imperial; Bearing Weight:0.5 Kg; Cage Type:Stamped Steel; d:34.976 mm; D:80.035 mm; B - Cone Width:20.940 mm; C - Cup Width:15.875 mm; B:21.435 mm; R - Cone Backface To Clear Radius1:1.520 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.89 mm; db - Cone Backface Backing Diameter:43.43 mm; Da - Cup Frontface Backing Diameter:73.90 mm; Db - Cup Backface Backing Diameter:69.09 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
IKO CF10-1RM Cam Follower and Track Roller - Stud Type | Series:28000; Cone Part Number:28138; Cup Part Number:28317; Design Units:Imperial; Bearing Weight:0.5 Kg; Cage Type:Stamped Steel; d:34.976 mm; D:80.035 mm; B - Cone Width:20.940 mm; C - Cup Width:15.875 mm; B:21.435 mm; R - Cone Backface To Clear Radius1:1.520 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.89 mm; db - Cone Backface Backing Diameter:43.43 mm; Da - Cup Frontface Backing Diameter:73.90 mm; Db - Cup Backface Backing Diameter:69.09 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
MCGILL CFE 3/4 Cam Follower and Track Roller - Stud Type Video