| IKO CF10-1R Cam Follower and Track Roller - Stud Type | Series:99000; Cone Part Number:99575; Cup Part Number:99100; Design Units:Imperial; Bearing Weight:13.3 Kg; Cage Type:Stamped Steel; d:146.050 mm; D:254.000 mm; B - Cone Width:66.675 mm; C - Cup Width:47.625 mm; B:66.675 mm; R - Cone Backface To Clear Radius1:7.110 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:162.05 mm; db - Cone Backface Backing Diameter:175.01 mm; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:227.08 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; a - Effective Center Location3:-12.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38500 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; C0 - Static Radial Rating:231000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26800 lbf; K - Factor7:1.43; e - ISO Factor8:0.41; Y - ISO Factor9:1.47; G1 - Heat Generation Factor (Roller-Raceway):556; G2 - Heat Generation Factor (Rib-Roller End):73.5; Cg - Geometry Factor:0.146; |
| 16 mm x 35 mm x 52 mm SKF NUKR 35 A Cam Follower and Track Roller - Stud Type | Series:99000; Cone Part Number:99575; Cup Part Number:99100; Design Units:Imperial; Bearing Weight:13.3 Kg; Cage Type:Stamped Steel; d:146.050 mm; D:254.000 mm; B - Cone Width:66.675 mm; C - Cup Width:47.625 mm; B:66.675 mm; R - Cone Backface To Clear Radius1:7.110 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:162.05 mm; db - Cone Backface Backing Diameter:175.01 mm; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:227.08 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; a - Effective Center Location3:-12.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38500 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; C0 - Static Radial Rating:231000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26800 lbf; K - Factor7:1.43; e - ISO Factor8:0.41; Y - ISO Factor9:1.47; G1 - Heat Generation Factor (Roller-Raceway):556; G2 - Heat Generation Factor (Rib-Roller End):73.5; Cg - Geometry Factor:0.146; |
| 30 mm x 80 mm x 100 mm SKF KR 80 PPA Cam Follower and Track Roller - Stud Type | Series:99000; Cone Part Number:99575; Cup Part Number:99100; Design Units:Imperial; Bearing Weight:13.3 Kg; Cage Type:Stamped Steel; d:146.050 mm; D:254.000 mm; B - Cone Width:66.675 mm; C - Cup Width:47.625 mm; B:66.675 mm; R - Cone Backface To Clear Radius1:7.110 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:162.05 mm; db - Cone Backface Backing Diameter:175.01 mm; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:227.08 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; a - Effective Center Location3:-12.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38500 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; C0 - Static Radial Rating:231000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26800 lbf; K - Factor7:1.43; e - ISO Factor8:0.41; Y - ISO Factor9:1.47; G1 - Heat Generation Factor (Roller-Raceway):556; G2 - Heat Generation Factor (Rib-Roller End):73.5; Cg - Geometry Factor:0.146; |
| IKO CF10-1VBUURM Cam Follower and Track Roller - Stud Type | Series:99000; Cone Part Number:99575; Cup Part Number:99100; Design Units:Imperial; Bearing Weight:13.3 Kg; Cage Type:Stamped Steel; d:146.050 mm; D:254.000 mm; B - Cone Width:66.675 mm; C - Cup Width:47.625 mm; B:66.675 mm; R - Cone Backface To Clear Radius1:7.110 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:162.05 mm; db - Cone Backface Backing Diameter:175.01 mm; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:227.08 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; a - Effective Center Location3:-12.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38500 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; C0 - Static Radial Rating:231000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26800 lbf; K - Factor7:1.43; e - ISO Factor8:0.41; Y - ISO Factor9:1.47; G1 - Heat Generation Factor (Roller-Raceway):556; G2 - Heat Generation Factor (Rib-Roller End):73.5; Cg - Geometry Factor:0.146; |
| IKO CF10-1UUR Cam Follower and Track Roller - Stud Type | Series:99000; Cone Part Number:99575; Cup Part Number:99100; Design Units:Imperial; Bearing Weight:13.3 Kg; Cage Type:Stamped Steel; d:146.050 mm; D:254.000 mm; B - Cone Width:66.675 mm; C - Cup Width:47.625 mm; B:66.675 mm; R - Cone Backface To Clear Radius1:7.110 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:162.05 mm; db - Cone Backface Backing Diameter:175.01 mm; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:227.08 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; a - Effective Center Location3:-12.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38500 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; C0 - Static Radial Rating:231000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26800 lbf; K - Factor7:1.43; e - ISO Factor8:0.41; Y - ISO Factor9:1.47; G1 - Heat Generation Factor (Roller-Raceway):556; G2 - Heat Generation Factor (Rib-Roller End):73.5; Cg - Geometry Factor:0.146; |
| IKO CF10-1RM Cam Follower and Track Roller - Stud Type | Series:99000; Cone Part Number:99575; Cup Part Number:99100; Design Units:Imperial; Bearing Weight:13.3 Kg; Cage Type:Stamped Steel; d:146.050 mm; D:254.000 mm; B - Cone Width:66.675 mm; C - Cup Width:47.625 mm; B:66.675 mm; R - Cone Backface To Clear Radius1:7.110 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:162.05 mm; db - Cone Backface Backing Diameter:175.01 mm; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:227.08 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; a - Effective Center Location3:-12.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38500 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; C0 - Static Radial Rating:231000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26800 lbf; K - Factor7:1.43; e - ISO Factor8:0.41; Y - ISO Factor9:1.47; G1 - Heat Generation Factor (Roller-Raceway):556; G2 - Heat Generation Factor (Rib-Roller End):73.5; Cg - Geometry Factor:0.146; |
| IKO CF10-1V Cam Follower and Track Roller - Stud Type | Series:99000; Cone Part Number:99575; Cup Part Number:99100; Design Units:Imperial; Bearing Weight:13.3 Kg; Cage Type:Stamped Steel; d:146.050 mm; D:254.000 mm; B - Cone Width:66.675 mm; C - Cup Width:47.625 mm; B:66.675 mm; R - Cone Backface To Clear Radius1:7.110 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:162.05 mm; db - Cone Backface Backing Diameter:175.01 mm; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:227.08 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; a - Effective Center Location3:-12.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38500 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; C0 - Static Radial Rating:231000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26800 lbf; K - Factor7:1.43; e - ISO Factor8:0.41; Y - ISO Factor9:1.47; G1 - Heat Generation Factor (Roller-Raceway):556; G2 - Heat Generation Factor (Rib-Roller End):73.5; Cg - Geometry Factor:0.146; |
| IKO CF10-1UU Cam Follower and Track Roller - Stud Type | Series:99000; Cone Part Number:99575; Cup Part Number:99100; Design Units:Imperial; Bearing Weight:13.3 Kg; Cage Type:Stamped Steel; d:146.050 mm; D:254.000 mm; B - Cone Width:66.675 mm; C - Cup Width:47.625 mm; B:66.675 mm; R - Cone Backface To Clear Radius1:7.110 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:162.05 mm; db - Cone Backface Backing Diameter:175.01 mm; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:227.08 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; a - Effective Center Location3:-12.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38500 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; C0 - Static Radial Rating:231000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26800 lbf; K - Factor7:1.43; e - ISO Factor8:0.41; Y - ISO Factor9:1.47; G1 - Heat Generation Factor (Roller-Raceway):556; G2 - Heat Generation Factor (Rib-Roller End):73.5; Cg - Geometry Factor:0.146; |
| IKO CF10-1VBUUR Cam Follower and Track Roller - Stud Type | Series:99000; Cone Part Number:99575; Cup Part Number:99100; Design Units:Imperial; Bearing Weight:13.3 Kg; Cage Type:Stamped Steel; d:146.050 mm; D:254.000 mm; B - Cone Width:66.675 mm; C - Cup Width:47.625 mm; B:66.675 mm; R - Cone Backface To Clear Radius1:7.110 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:162.05 mm; db - Cone Backface Backing Diameter:175.01 mm; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:227.08 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; a - Effective Center Location3:-12.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38500 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; C0 - Static Radial Rating:231000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26800 lbf; K - Factor7:1.43; e - ISO Factor8:0.41; Y - ISO Factor9:1.47; G1 - Heat Generation Factor (Roller-Raceway):556; G2 - Heat Generation Factor (Rib-Roller End):73.5; Cg - Geometry Factor:0.146; |
| 12 mm x 30 mm x 40 mm SKF KR 30 PPXA Cam Follower and Track Roller - Stud Type | Series:99000; Cone Part Number:99575; Cup Part Number:99100; Design Units:Imperial; Bearing Weight:13.3 Kg; Cage Type:Stamped Steel; d:146.050 mm; D:254.000 mm; B - Cone Width:66.675 mm; C - Cup Width:47.625 mm; B:66.675 mm; R - Cone Backface To Clear Radius1:7.110 mm; r - Cup Backface To Clear Radius2:3.30 mm; da - Cone Frontface Backing Diameter:162.05 mm; db - Cone Backface Backing Diameter:175.01 mm; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:227.08 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; a - Effective Center Location3:-12.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38500 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; C0 - Static Radial Rating:231000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26800 lbf; K - Factor7:1.43; e - ISO Factor8:0.41; Y - ISO Factor9:1.47; G1 - Heat Generation Factor (Roller-Raceway):556; G2 - Heat Generation Factor (Rib-Roller End):73.5; Cg - Geometry Factor:0.146; |