MCGILL CCFH 1 1/2 S Cam Follower and Track Roller - Stud Type Interchange Guide | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | Noun | UNSPSC | Weight | Profile | Inventory | Enclosure | Hex Socket | Thread Size |
CCFH 1 1/2 SB | MCGILL | Bearing | 31171530 | 0.281 | Stud Type | 0.0 | Sealed | Yes | 7/8-14 |
CCFH 1 1/2 S | MCGILL | Bearing | 31171530 | 0.277 | Stud Type | 0.0 | Sealed | No | 7/8-14 |
IKO CF10-1R Cam Follower and Track Roller - Stud Type | Series:16000; Cone Part Number:16137; Cup Part Number:16282; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:34.925 mm; D:71.999 mm; B - Cone Width:20.638 mm; C - Cup Width:14.237 mm; B:18.999 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.39 mm; db - Cone Backface Backing Diameter:46.99 mm; Da - Cup Frontface Backing Diameter:67.10 mm; Db - Cup Backface Backing Diameter:62.99 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:12700 lbf; C0 - Static Radial Rating:14800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2270 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.3; G2 - Heat Generation Factor (Rib-Roller End):14.5; Cg - Geometry Factor:0.0707; |
IKO CF10-1VBUUR Cam Follower and Track Roller - Stud Type | Series:16000; Cone Part Number:16137; Cup Part Number:16282; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:34.925 mm; D:71.999 mm; B - Cone Width:20.638 mm; C - Cup Width:14.237 mm; B:18.999 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.39 mm; db - Cone Backface Backing Diameter:46.99 mm; Da - Cup Frontface Backing Diameter:67.10 mm; Db - Cup Backface Backing Diameter:62.99 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:12700 lbf; C0 - Static Radial Rating:14800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2270 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.3; G2 - Heat Generation Factor (Rib-Roller End):14.5; Cg - Geometry Factor:0.0707; |
IKO CF10-1VBUURM Cam Follower and Track Roller - Stud Type | Series:16000; Cone Part Number:16137; Cup Part Number:16282; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:34.925 mm; D:71.999 mm; B - Cone Width:20.638 mm; C - Cup Width:14.237 mm; B:18.999 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.39 mm; db - Cone Backface Backing Diameter:46.99 mm; Da - Cup Frontface Backing Diameter:67.10 mm; Db - Cup Backface Backing Diameter:62.99 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:12700 lbf; C0 - Static Radial Rating:14800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2270 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.3; G2 - Heat Generation Factor (Rib-Roller End):14.5; Cg - Geometry Factor:0.0707; |
12 mm x 30 mm x 40 mm SKF KR 30 PPXA Cam Follower and Track Roller - Stud Type | Series:16000; Cone Part Number:16137; Cup Part Number:16282; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:34.925 mm; D:71.999 mm; B - Cone Width:20.638 mm; C - Cup Width:14.237 mm; B:18.999 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.39 mm; db - Cone Backface Backing Diameter:46.99 mm; Da - Cup Frontface Backing Diameter:67.10 mm; Db - Cup Backface Backing Diameter:62.99 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:12700 lbf; C0 - Static Radial Rating:14800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2270 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.3; G2 - Heat Generation Factor (Rib-Roller End):14.5; Cg - Geometry Factor:0.0707; |
IKO CF10-1UUR Cam Follower and Track Roller - Stud Type | Series:16000; Cone Part Number:16137; Cup Part Number:16282; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:34.925 mm; D:71.999 mm; B - Cone Width:20.638 mm; C - Cup Width:14.237 mm; B:18.999 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.39 mm; db - Cone Backface Backing Diameter:46.99 mm; Da - Cup Frontface Backing Diameter:67.10 mm; Db - Cup Backface Backing Diameter:62.99 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:12700 lbf; C0 - Static Radial Rating:14800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2270 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.3; G2 - Heat Generation Factor (Rib-Roller End):14.5; Cg - Geometry Factor:0.0707; |
IKO CF10-1UU Cam Follower and Track Roller - Stud Type | Series:16000; Cone Part Number:16137; Cup Part Number:16282; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:34.925 mm; D:71.999 mm; B - Cone Width:20.638 mm; C - Cup Width:14.237 mm; B:18.999 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.39 mm; db - Cone Backface Backing Diameter:46.99 mm; Da - Cup Frontface Backing Diameter:67.10 mm; Db - Cup Backface Backing Diameter:62.99 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:12700 lbf; C0 - Static Radial Rating:14800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2270 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.3; G2 - Heat Generation Factor (Rib-Roller End):14.5; Cg - Geometry Factor:0.0707; |
16 mm x 35 mm x 52 mm SKF NUKR 35 A Cam Follower and Track Roller - Stud Type | Series:16000; Cone Part Number:16137; Cup Part Number:16282; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:34.925 mm; D:71.999 mm; B - Cone Width:20.638 mm; C - Cup Width:14.237 mm; B:18.999 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.39 mm; db - Cone Backface Backing Diameter:46.99 mm; Da - Cup Frontface Backing Diameter:67.10 mm; Db - Cup Backface Backing Diameter:62.99 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:12700 lbf; C0 - Static Radial Rating:14800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2270 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.3; G2 - Heat Generation Factor (Rib-Roller End):14.5; Cg - Geometry Factor:0.0707; |
30 mm x 80 mm x 100 mm SKF KR 80 PPA Cam Follower and Track Roller - Stud Type | Series:16000; Cone Part Number:16137; Cup Part Number:16282; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:34.925 mm; D:71.999 mm; B - Cone Width:20.638 mm; C - Cup Width:14.237 mm; B:18.999 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.39 mm; db - Cone Backface Backing Diameter:46.99 mm; Da - Cup Frontface Backing Diameter:67.10 mm; Db - Cup Backface Backing Diameter:62.99 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:12700 lbf; C0 - Static Radial Rating:14800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2270 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.3; G2 - Heat Generation Factor (Rib-Roller End):14.5; Cg - Geometry Factor:0.0707; |
IKO CF10-1RM Cam Follower and Track Roller - Stud Type | Series:16000; Cone Part Number:16137; Cup Part Number:16282; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:34.925 mm; D:71.999 mm; B - Cone Width:20.638 mm; C - Cup Width:14.237 mm; B:18.999 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.39 mm; db - Cone Backface Backing Diameter:46.99 mm; Da - Cup Frontface Backing Diameter:67.10 mm; Db - Cup Backface Backing Diameter:62.99 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:12700 lbf; C0 - Static Radial Rating:14800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2270 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.3; G2 - Heat Generation Factor (Rib-Roller End):14.5; Cg - Geometry Factor:0.0707; |
IKO CF10-1V Cam Follower and Track Roller - Stud Type | Series:16000; Cone Part Number:16137; Cup Part Number:16282; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:34.925 mm; D:71.999 mm; B - Cone Width:20.638 mm; C - Cup Width:14.237 mm; B:18.999 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:40.39 mm; db - Cone Backface Backing Diameter:46.99 mm; Da - Cup Frontface Backing Diameter:67.10 mm; Db - Cup Backface Backing Diameter:62.99 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:12700 lbf; C0 - Static Radial Rating:14800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2270 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.3; G2 - Heat Generation Factor (Rib-Roller End):14.5; Cg - Geometry Factor:0.0707; |
MCGILL CCFH 1 1/2 S Cam Follower and Track Roller - Stud Type Video