6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type Interchange Guide | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | h | W | G | C | d | B | D | M |
| GAKR 16 PB | INA | 66 mm | - | - | 21,6 kN | 16 mm | 21 mm | 32 mm | - |
| GAKR 16 PW | INA | 66 mm | - | - | 39 kN | 16 mm | 21 mm | 32 mm | - |
| GIKR 16 PB | INA | - | 22 mm | - | 21,6 kN | 16 mm | 21 mm | 32 mm | - |
| GIKR 16 PW | INA | - | 22 mm | - | 39 kN | 16 mm | 21 mm | 32 mm | - |
| KR 16 PPSKA | SKF | - | - | M 6 | 11 mm | 6 mm | 28 mm | 16 mm | - |
| KR 16 X | SKF | - | - | M 6 | 11 mm | 6 mm | 28 mm | 16 mm | 4 mm |
| KR 16 PPA | SKF | - | - | M 6 | 11 mm | 6 mm | 28 mm | 16 mm | 4 mm |
| KR 16 PPXA | SKF | - | - | M 6 | 11 mm | 6 mm | 28 mm | 16 mm | 4 mm |
| KR 16 | SKF | - | - | M 6 | 11 mm | 6 mm | 28 mm | 16 mm | 4 mm |
| KR 16 PPX | BEARINGS LIMITED | - | - | - | - | - | - | - | - |
| KR 16 PP | INA | - | - | - | - | - | - | - | - |
| IKO CF10-1VBUURM Cam Follower and Track Roller - Stud Type | Series:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816; |
| IKO CF10-1V Cam Follower and Track Roller - Stud Type | Series:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816; |
| IKO CF10-1RM Cam Follower and Track Roller - Stud Type | Series:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816; |
| IKO CF10-1VBUUR Cam Follower and Track Roller - Stud Type | Series:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816; |
| IKO CF10-1UUR Cam Follower and Track Roller - Stud Type | Series:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816; |
| 16 mm x 35 mm x 52 mm SKF NUKR 35 A Cam Follower and Track Roller - Stud Type | Series:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816; |
| IKO CF10-1R Cam Follower and Track Roller - Stud Type | Series:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816; |
| 30 mm x 80 mm x 100 mm SKF KR 80 PPA Cam Follower and Track Roller - Stud Type | Series:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816; |
| IKO CF10-1UU Cam Follower and Track Roller - Stud Type | Series:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816; |
| 12 mm x 30 mm x 40 mm SKF KR 30 PPXA Cam Follower and Track Roller - Stud Type | Series:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816; |
6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type Video
SKF KR 16 Cam Follower, Standard Stud, Crowned, Slotted
SKF KR 16 Cam Follower, Standard Stud, Crowned, Slotted End, Needle Roller, Metric, 16mm Roller Diameter, 6mm Stud Diameter, M6X1 Thread: Cam
KR16 SKF Cam Follower 16x11 M6 thread
KR16 SKF Cam Follower 16x11 M6 thread. KR design cam followers are fitted with a needle roller and cage assembly. They are also available with a full
SKF - KR 16 - Motion Industries
SKF KR 16. Crowned Cam Follower - KR Series, 16 mm Roller Dia, 11 mm Roller Width, 6 mm Stud Dia, 16 mm Stud Length, Open, Steel Material
SKF KR 16 PPA - Crowned Cam Follower - 16 mm Roller Dia
SKF KR 16 PPA - Crowned Cam Follower - 16 mm Roller Dia, 11 mm Roller Width, 6 mm Stud Dia, 16 mm Stud Length - - Amazon.com
SKF - KR 16 PPA - Motion Industries
Buy SKF Crowned & Flat Cam Followers KR 16 PPA direct from Motion Industries. Your proven service leader with reliable delivery since 1972
kr 16 ppska - SKF
SKF uses cookies on our web site to align the information shown as closely as possible to the visitors' preferences and to tailor our web site user experience in