Tapered Roller Bearing Assemblies
Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces.
The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
The rollers are stabilized and restrained by a flange on the inner ring, against which their large end slides, which stops the rollers from popping out due to the "pumpkin seed effect" of their conical shape.
- TIMKEN L882449-904A5 Tapered Roller Bearing Assemblies
- LM501300
- LM501349HP
- TIMKEN L882449-904A6 Tapered Roller Bearing Assemblies
- 285000
- EE285160
- TIMKEN L879947-90020 Tapered Roller Bearing Assemblies
- HH953700
- HH953749
- TIMKEN L879947-902A1 Tapered Roller Bearing Assemblies
- 7-15/16 in
- Viton Single Lip
- TIMKEN L879947-90012 Tapered Roller Bearing Assemblies
- 285000
- EE285160
- TIMKEN L865547-902A2 Tapered Roller Bearing Assemblies
- 32304M
- X32304M
- TIMKEN L860049AA-902A6 Tapered Roller Bearing Assemblies
- 2.25 in
- Felt Seal
- TIMKEN L860049-902A3 Tapered Roller Bearing Assemblies
- 1 3/16 in
- Ball Bearing
- TIMKEN L860048-90023 Tapered Roller Bearing Assemblies
- 2.75 in
- Felt Seal